Parts configurator

Define, check and request a shaft

Enter dimensions, check the 3D model and drawing, download STEP and PDF.

AGMT does not manufacture itself; we coordinate partner workshops.

Loading configurator …

What the configurator does

The parts configurator lets you describe rotationally symmetric turned parts right in your browser: stepped or plain shafts and bushings. Enter diameters, lengths and features and you immediately see a 3D preview and a draft drawing. From these details you request a quote. AGMT coordinates manufacturing through qualified partner shops.

What you enter

  • Part type and material
  • Sections with diameter, length, tolerance and roughness Ra
  • Features such as keyway (DIN 6885-1), retaining ring groove (DIN 471) and cross hole
  • Transitions with radius, undercut or chamfer, and the ends with face chamfer, centre hole or thread
  • Quantity, optionally a requested date and notes

What you get

  • A 3D preview with key figures such as overall length and, once a material is selected, weight
  • A STEP file and a draft drawing as PDF once the part is complete
  • A short code that describes your part and makes follow-up questions easier

The generated drawing is a draft, not a release for production. We check dimensions and standard values with the partner shop before anything is made.

How the request works

  1. Describe the part: enter part type, material, sections and features.
  2. Check: review the 3D preview, notes and draft drawing.
  3. Request: enter quantity and contact details and send the request.
  4. Quote: we review your request and get back to you with a quote.

Frequently asked questions

Does it cost anything to use the configurator?

No. The configurator, the downloads and the request are free of charge. A request is not yet an order.

Does AGMT manufacture the parts itself?

No. AGMT does not manufacture itself; we coordinate manufacturing through qualified partner shops.

Is the drawing from the configurator ready for production?

No. It is a draft. Dimensions and standard values are checked before production.

Which parts can I configure?

Currently shafts, stepped or plain, and bushings. For other parts, just send us an email or use the contact form.

What happens to my details?

We process them to answer your request. We only pass technical details of the part on to partner shops as far as needed for the quote and manufacturing. Details are in the privacy policy.